China Stainless Steel 316H Forged Flanges Manufacturers, Suppliers, Factory

The 316 Stainless Steel Weld Neck Flanges is attached to the pipe end. It is the part that connects the pipe to the pipe. There are holes on the flange, and bolts can be worn to make the two flanges tightly connected, and the flange is sealed with a liner. Flanged pipe fittings are pipe fittings with flanges (flanges or joints). It can be cast, threaded or welded. The flange connection is composed of a pair of flanges, a gasket and a number of bolts and nuts. The gasket is placed between the sealing surface of the two flanges. After tightening the nut, the specific pressure on the surface of the gasket will be deformed after reaching a certain value, and the uneven part of the sealing surface will be filled to make the connection tight without leakage. A flange connection is a detachable connection. According to the connected parts can be divided into container flange and pipe flange. According to the structure type, there are integral flange, looper flange and threaded flange. Common integral flanges are flat welding flange and butt welding flange.

Duplex Steel S31803 Weld Neck Flanges is not easy to deformation, good sealing, widely used, suitable for pressure or temperature fluctuations of the pipeline or high temperature, high pressure and low temperature pipeline, the advantage is that the price is relatively cheap, nominal pressure does not exceed 2.5MPa; Also used for conveying expensive, flammable, explosive medium pipeline, nominal pressure in PN16MPa.

316 Stainless Steel Slip on Flange is not only saves space, reduces weight, more important is to ensure that the joint parts will not leak, with good sealing performance. The compact flange size is reduced by reducing the diameter of the seal, which will reduce the cross section of the sealing surface. Secondly, the flange gasket has been replaced by the sealing ring to ensure that the sealing face matches the sealing surface. In this way, very little pressure is needed to compact the cover. With the reduction of the required pressure, the size and number of bolts can be reduced accordingly, so a new product has been designed that is small in size and light in weight (70% ~ 80% less than the weight of the traditional flange). Therefore, flat welding flange type is a better flange product, reduce the quality and space, for industrial use plays an important role.

Zhejiang Hangong Flange Technology Co., Ltd. is a large-scale reducer pipe fitting manufacturer and supplier in China. We have been specialized in stainless steel flanges, duplex steel flanges, super duplex steel flange, pipe fitting for many years. reducer pipe fitting has a good price advantage and cover most of the European and American markets. We look forward to becoming your long-term partner in China.

Zhejiang Hangong Flange Technology Co., Ltd. is a large-scale super duplex F51 steel plate flanges manufacturer and supplier in China. The following is an introduction to super duplex F51 steel plate flanges, I hope to help you better understand super duplex F51 steel plate flanges. Welcome new and old customers to continue to cooperate with us to create a better future together! We hope to establish friendly cooperative relationship with your company with high quality products, reasonable price, considerate service and create a better future hand in hand.

Duplex Steel S31803 Blind Flanges plays the role of isolation and cutting, and the role of the head, tube cap, welding plug is the same. Because of its good sealing performance, for the need to isolate the system, generally as a reliable isolation means. A plate plate blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate is shaped like figure 8. One end is the blind plate and the other end is the throttle ring, but the diameter is the same as the pipe diameter, so it does not play the throttling role. 8-figure blind plate, easy to use, need isolation, use the blind plate end, need normal operation, use the throttle ring end, but also can be used to fill the installation gap of the blind plate on the pipeline. Another feature is that it is clearly marked and easy to identify the installation status.